We install a patented hitch that will allow you to safely tow your toys and will extend up to 60" to accommodate even the largest truck/camper! Lifetime guarantee!

• Proudly made in the USA
• Lifetime Warranty
• Unmatched Safety
• Only system in the WORLD with:
          Highest weight capacity available
          Hydraulic Spring Bar Tension Assist 
          Adjustable Chain Slide Collars

1. Sway Control Brackets:
Rigid trailer attachments work with friction sway control to combat trailer sway. Brackets are height adjustable to control the amount of weight distribution tension on the spring arms.
2. Spring Arms:
The spring arms serve two purposes. When raised onto the sway control brackets they transfer trailer tongue weight evenly to the tow vehicle. They also work with the friction sway control to reduce trailer sway.
3. Downward Pressure:
Downward pressure from trailer tongue increases friction sway control. Trailer hitch ball mounts here.
4. Upward Pressure:
Sway control brackets distribute weight by maintaining upward pressure on spring arms. The amount of pressure on the spring arms is a factor of trailer tongue weight and vehicle suspension. The friction sway control utilizes this pressure to control trailer sway.
5. Friction sway control:
Friction is enhanced by downward pressure from trailer tongue and upward pressure on spring arms. These opposing pressures come together to create an unequaled sway control system.

Torklift Compared To Reese

Kit Includes:

• (2) Springloads
• (2) HD Forged Steel Turnbuckles
• (2) 24" Marine Grade Chain
• (2) Quicklinks

Designed exclusively for all Torklift frame mounted tie downs. The Springload XL turnbuckle gives a custom clean look and an inexpensive upgrade alternative to the basic springload and chain system. The Springload XL incorporates the lifetime guarantee FastGun internal springs and spring tension indicators. Sold in sets of two with a reach of 28" to 44".

Sold in sets of 2. Each piece is precision-made from High-Impact Powder-Coated Stainless-Steel, comes Spring Loaded and includes Spring Tension Indicators and our Lifetime Guarantee. Did we mention that they're also the fastest turnbuckles on the market? With the revolutionary FastGun Quick Disconnect feature your campsite camper leveling process is FAST; by allowing you to easily use your electric jacks to level your camper when the camper is left on the truck. This avoids the hassle of leveling blocks under your tires.

Sold in sets of four, the Derringer has been designed to thread easily onto 1/2" threaded rods found on all major truck camper turnbuckle brands.

The all new Fastgun Derringers are available in industrial zinc plated steel as well as our ever popular Powder Coated Stainless Steel version.

Keep your turnbuckles safe from tampering with the Fastgun Locks. They work with all the Fastgun series including the Derringer turnbuckles. Fastgun locks are keyed alike for convenience. They feature a snap lock design, a quick and easy lock and unlock, they come with weather caps to prevent weather damage and road grime. The Fastgun locks have automotive quality plating and are available in four packs.

The Glowstep is the latest innovation from Torklift International, the leading manufacturer of world famous RV and Towing products such as their patented Frame Mounted Camper Tie Downs, SuperHitch 17,000 lb. rated receiver hitch, and the elite FastGun camper turnbuckes.

The Glowstep is an accordion style folding staircase that is designed to mount on any truck camper, allowing safe and secure entry and exit of the camper. Unlike other camper steps of the same style, the Glowstep features aircraft grade aluminum and stainless steel hardware and fasteners. The steps have unique "Sure-Grip" extrusions so you won't have to worry about replacing sand paper strips every season.

You can expect to get about 10 hours worth of illumination from the glow in the dark tabs with only 5 minutes of light exposure. And as usual with TorkLift products, the Glow Step comes with a lifetime warranty.

Features:

• Lifetime Warranty
• Ultra light weight (44 Ounces)
• Glows for up to 10 hours
• From in-use to storage in seconds
• Handrail arms Telescope from 32" to 53"
• Locks to your RV
• Universal Mounting Brackets
• Comes with Wash Brush
• Proudly made in the USA

Does your vehicle handle like the Queen Mary? Does it pitch and roll with everygust of wind or passing semi, list to port starboard on the curves, or waddle over speed bumps, railroad tracks and driveways? Well, it shouldn't. As a matter of fact, motorhomes, SUV's pickup trucks and vancs can be made to handle just like they are - motor vehciles - with two aftermarket upgrades.

Upgrading your shock absorbers will control up and down motion, But the best shocks in the world won't affect side to side sway by one iota.

The solution to sway is the suspension. Adding a set of Roadmaster Suspension Solutions anti-sway bars to your uspension system will have the same effect on sway as a good set of shocks has on up and down motion - tere's an immediate improvement in stability and tracking, espically on curves.

For many, this is an empowering experience. What was beyond their control, just yesterday, is suddenly within it - cornering with confidence, quicker maneuvinger and a remarkably level ride over unever terrain - all without launching the dishes out of the cupboard. And even afer eight or 10 hours at the wheel, they arrive fresh, instead of fatigured, which means they can start enjoying the Grand Canyon, the Grand Tetons or the grandkids right away.

With the Rancho RS9000xl's 9 way adjustable valving system, you have the adjustability for on camper and off camper ride quality. When the camper is loaded you turn the shocks up to level 9 for the stiffest setting to prevent porpoising as much as possible. This will increase the handling of the truck with a fully loaded camper. When not using the camper, dial the setting down to a 3 or 4 based upon your comfort level.

Features:

• 2.75-in. (70mm) body diameter*
• Large 18mm chrome rod*
• 9-position tuning technology
• Nitrogen gas charged
• Liquid metallic finish
• Polyurethane bushings
• Protective boot included

The StableLoad dramatically improves the vehicles handling characteristics by "reactivating" the stabilizing effect designed into the rear springs by keeping them actively under load the way your vehicle factory engineers designed them to operate. All StableLoads are designed to dramatically improve the handling characteristics of your loaded vehicle by "pre-loading" the factory overload spring. The Quick Disconnect StableLoad Series (patent pending) incorporates a unique design that allows the StableLoad to quickly engage or disengage your overloads, enabling your vehicle to return to the soft stock ride in just seconds. This is accomplished by bolting each of the four StableLoads onto each overload end (two per passenger side, two per driver side). The Quick Disconnect StableLoad Series is designed with a tapered wedge mounted to a hinge mechanism that allows the StableLoad to be hinged in or out of position using a common 3/8" ratchet extension and ratchet.

Due to the dramatic improvement in overall handling characteristics from the StableLoad and its extremely low cost,* we recommend any suspension enhancement upgrades start with the StableLoad and that the vehicle operator evaluate as to whether any further upgrades are needed as very often the StableLoad suspension enhancement qualities are found to be more than enough improvement and no further costly suspension equipment may be required.**

Ride-Rite™ air helper springs mount between the frame and the suspension of light-trucks, vans, and motorhomes. The heavy-duty convoluted air springs will handle all leveling needs with load carrying capacities between 3,200-5,000 lbs per set*.
Ride-Rite™ air helper springs will:

• Level the vehicle front-to-rear & side-to-side
• Adjustability 5-100 p.s.i.
• Stabilize the vehicle while loaded
• Maximize vehicles load carrying capacity

• Engages and disengages in seconds
• Lifetime warranty
• Quick no-drill installation
• Dramatically improves safety, handling and sway reduction
• Lower air spring pressure
• Angled design to maximize spring contact surface
• Anti-rotation key tabs
• Kit includes four StableLoads (outfits one complete vehicle)

You may find a need for these once you put your camper on. We stock specific, as well as universal applications.

Features:

• Fits OE Mounting
• NO DRILLING REQUIRED!
• Fold-away & Break-away feature for tight spaces
• 2-1/2"x3-3/4" wedge spot mirrors included
• Mirror face available in Manual, Electric, & Heated
• 10" x 10" mirror face for unsurpassed visibility
• Manually extends or retracts 4.25

The camp'r pack'r's are a great easy, safe, reliable way to store your camper. Rated at 6,000 lbs. Per pair. Just simply purchase the treated lumber and install the brackets. These brackets allow you to build two heavy duty stands to support your truck camper when off the truck. Also includes angled "foot" brackets for bottoms of legs as well as eye bolts and chains to prevent spreading. Easily fold up for storage when not in use.

IT COST THOUSANDS TO REPAIR THIS CAMPER AND TRUCK DUE TO FAILED JACKS!

Most pickup campers come equipped with electric jacks which makes them easy to unload and lower down close to the ground for easy access. The problem is that the camper sways back and forth on the jacks when you walk around in it or simply try to sleep. Every time you move the whole camper moves. It’s not practical to carry saw horses or large numbers of blocks or additional jacks to stabilize your camper so what do you do?

• Dramatically reduces camper jack/frame stress
• Increase camper comfort by eliminating camper movement
• Fully adjustable
• Stainless steel and aircraft grade aluminum
• Round and square jack applications
• Lifetime warranty
• Proudly made in the USA

Bed Mats are a cost-effective solution to protect your truck bed surface free from scratches, dings and dents. Shifting cargo is also a detriment to your truck’s appearance. Bed Mats help prevent shifting cargo from damaging your truck and eliminate chasing down loose items strewn about the truck bed.

Bed Mats are custom fitting to your truck by contouring around wheel wells for ultimate coverage. Rubber cleats on the reverse side facilitate water drainage and keep the Bed Mat securely in place. Made in the USA with superior manufacturing, you can trust heavy-duty Bed Mats to last the life of your truck.

The supertruss skid wheel attaches to the supertruss and protects the truss extension from scraping or bottoming out.